How to easily install and disassemble the bar chair
First, the installation of bar chairs:
Bar chair installation first step: understand the structure of the bar chair.
It usually consists of three parts, one is a seat cushion, one is a lever (lifting rod), one foot or a tripod.
Bar chair installation second step: assembling the air pressure bar and the foot.
The bar chair is mounted similar to an office chair. First, the part that connects the air bar to the seat cushion is the hole in the middle of the foot bar (foot stand).
Bar chair installation third step: installation pad
Insert the hole at the bottom of the pole cushion into the air pressure lever. Then rotate it a few more times. Finally, adjust the handlebar at the bottom of the lever cushion to see if the air pressure lever can adjust the height normally.
Second, the bar chair disassembly:
After reading the installation process, you know that the structure of the bar chair is very simple. Therefore, the disassembly is very simple. First, the bottom of the chair is turned upside down and the chair is off the ground. And use the hammer, in order to avoid damage to the chair, please hit the bottom of the gas stick head, under the combined action of gravity, inertia and impact force on the upper part of the chair, the gas rod can be separated from the chair foot several times by several impacts.Grab the gas lever with your hand, open the chair and let the chair off the ground. Then use a hammer to strike the metal tray (base) on the bottom of the mat. Therefore, under the combined action of gravity, inertia and impact force on the upper part of the chair, the gas bar separates the metal tray at the bottom of the mat.