Choose The Race Chair, These 4 Points Must Pay Attention!
1 look at the five claws
At present, there are basically three kinds of five-claw materials for chairs: steel, nylon, and aluminum alloy. In terms of cost, aluminum alloy>nylon>steel, however, the material used in each brand is different, and it cannot be arbitrarily stated that the aluminum alloy material must be better than steel. When purchasing, it is necessary to see if the material of the five-jaw wall is solid. The five-jaw material of the esports chair will be much wider than the ordinary computer chair. The five-prong bearing capacity of the brand e-sports chair can reach more than one ton, which can meet the needs of all users. If it is too thin or the material of the five-jaw is insufficient, the static load-bearing is basically no problem, but the instantaneous load-bearing is poor and the durability is also deteriorated. Both of the pictures are made of nylon five claws, which is better at a glance.
2 look at the filler
Many people will say, why should I buy an esports chair? The esports chair cushion is so hard that it is not as comfortable as the sofa.
In fact, because the sofa is too soft, sitting on it, the support of people's weight is not stable. Users often move their bodies intentionally or unconsciously to seek new balance and stability. Therefore, sitting on the sofa for a long time will make people feel Back pain, fatigue, fatigue, damage to the buttocks.
The e-sports chair generally uses a whole piece of shaped sponge for long-term sedentary.
There are basically two ways to classify sponges, native sponges and regenerative sponges; shaped sponges and ordinary sponges.
Recycled sponge: As can be seen from the following figure, the recycled sponge is recycled and reused by industrial waste, which has odor and may contain harmful substances and endangers health. Poor sitting, easy to deform and collapse. In general, the cheapest chairs on the market are all made of recycled sponges.
Native sponge: a whole piece of sponge, environmentally friendly, soft and comfortable, good sitting.
The sponge shown below is also a native sponge, but the naked eye can also distinguish that the density is very loose, and it is rotten when it is pinched. Although it feels soft when sitting for the first time, it is easy to collapse and deform for a long time.
Styling sponges: Generally speaking, ordinary computer chairs rarely use styling sponges, and only some brands of e-sports chairs will be used. The styling sponge is more expensive, requires mold opening, and is integrally formed. The density and resilience are greatly improved compared with the non-shaped sponge, and it is more durable. In general, the higher the density of the chair, the better the rebound resilience and the more comfortable the seat. The density of the sponge of the ordinary electric running chair is 30kg/m3, and the brand e-sports chair like the proud wind has a density of more than 45kg/m3.
When choosing an electro-optical chair, it is recommended to choose a high-density native styling sponge.
3 see the overall skeleton
A good e-sports chair generally adopts an integrated steel frame process, which can fully enhance the life and load-bearing performance of the chair. At the same time, piano lacquer maintenance for the skeleton will be done to prevent rust from affecting the life. If it is online shopping, we must pay attention to see if the manufacturer dares to put the skeleton structure on the product page. If the internal skeleton structure is not dare to display, you can basically give up the purchase.
Regarding the skeleton of the cushion, there are basically three types on the market, engineering wood boards, rubber strips, and steel frames. Everyone knows that the engineering board is a secondary synthesis, and the weight is poor. It also contains substances harmful to the body. Some cheap e-sports chairs basically use this. A little better will use a green rubber strip, which can be rebounded by a rubber band and will feel softer when sitting on a chair. However, many of these strips do not provide reinforcement, and are prone to deformation over a long period of time, which greatly affects the service life.
The higher the cost is that the entire seat cushion is reinforced with steel bars, the force is more balanced, and the load-bearing capacity of the seat cushion is greatly improved.
4 look back
Unlike ordinary chairs, esports chairs are generally high backs that share the weight from the lower part of the spine; the ergonomic curve of the back provides a natural fit. The weight of the back of the spine and the back of the thigh is properly distributed to the seat and the back of the thigh to minimize the discomfort of the pressure point.
Generally speaking, the backrest of the esports chair on the market is pu material. The advantage of this material is that it feels comfortable and looks high-grade. The disadvantage is that it is not gas permeable, and it is easy to hydrolyze after being exposed to water, which causes the PU skin to be easily cracked.
In order to make up for this deficiency, many e-sports chairs will be upgraded in the materials used, and the protective film is covered in the pu, which is the hydrolysis-resistant pu. Or use pvc composite type half pu, pvc upper layer covers pu, does not seep water, use for a long time, while pu cover, softer and more comfortable than ordinary pvc. The current market has three levels of one year, two years, and three years, and brand e-sports chairs generally use level 3.
If you want to choose the esports chair of pu material, you must choose a fabric that is resistant to hydrolysis.
But even the best pu fabrics are not as good as mesh in terms of breathability, so manufacturers like the proud wind will also introduce the material of the mesh, and summer is not afraid of sultry. Compared with ordinary mesh computer chairs, it is also more resistant to stretching and softness. More detailed in the preparation process, but also equipped with flame retardant materials and so on.
All in all, when purchasing an e-sports chair, be sure to carefully study the page description and polish your eyes.